 |
Simple and effective way to mount the Astro Presenter on your telescope
You can skip all the expensive and complicated mounts for your Astro Presenter. Installing the mount on your telescope is extremely simple and aligning your Astro Presenter to your telescope is also as swift.
Easy installation
You can use your existing finder scope mount screw on the telescope to mount the mount on your telescope. Or you can use the included screws to fasten onto your telescope. The mount only requires one screw from your telescope to install and use the included double-sided tape to keep the mount stable when fastened to the telescope.
Intuitive X-Y alignment screw design
The four X-Y axis screws serve as alignment and holding screws for your Astro Presenter. To adjust the X-axis, simply screw/unscrew the front two alignment screws, and to adjust the Y-axis, simple screw/unscrew the back two alignment screws.
Astro Presenter Mount
The mount has additional rings to hold a smaller diameter tube in place for your Astro Presenter. The mount installation and laser pointing alignment is exactly the same as the Astro Aimer's. |
|
|
